OEC 9800 C-arm Cross Arm Brake Repair

How to change a cross-arm brake? GE OEC 9800 C-arm

Is your c-arm loosey goosey? You might need to change you cross arm brake. Changing a cross-arm brake on a GE OEC 9800 c-arm involves adjusting or configuring the braking system to suit your procedural needs. The cross-arm brake is important for stabilizing the arm in place during imaging. Here’s a general steps to help you through the process:

8 Tips to Change to Cross Arm Brake on GE OEC 9800 C-arm:

Power Off and Safety:
- Make sure that the c-arm is powered off and unplugged from the wall to prevent any accidental movements or electric shocks. Ouch!
Find the Brake Controls:
- The GE OEC 9800 c-arm has a grey brake located on the cross arm and other moving parts. Find the brake controls on the cross arm assembly.
Identify the Brake Mechanism:
- On the OEC 9800c-arm, you should see brake levers located the pivot points of the cross arm. The exact location may be a little different on the specific model and configuration.
Release the Current Brake:
- If the cross arm brake is currently engaged or set to another mode, you’ll need to release it. This typically involves loosening or unlocking the brake mechanism. Look for any lever or knob that you need to adjust.
Adjust the Brake to Cross Arm Mode:
- Set the brake to the cross arm mode. This might involve flipping a switch to lock the cross arm in place. Ensure that the brake is securely engaged to prevent any movement.
Movement Test:
- Once you’ve adjusted the brake, test the movement of the cross arm to make sure it’s tightly locked. Check for any wobbling or wiggling, and make sure the C- arm stays in the desired position during operation.
Owner‘s Manual:
- If you’re not sure about any correct steps or need detailed instructions, refer to the operator’s manual for the GE OEC 9800. The manual will provide diagrams and detailed instructions tailored to the model you’re using.
Contact Technical Support:
- If you have any questions about brake installation or general c-arm questions, please contact us sales@pacifichealthusa.com or call 619-810-0020