Are refurbished C-Arms as reliable as new equipment?

Yes. When restored by a qualified provider, refurbished units deliver the same clinical performance and reliability expected in daily use. Key components are inspected, replaced, and calibrated to ensure dependable operation.

How much can a clinic save by choosing refurbished?

Clinics typically save 40% to 70% compared to purchasing new. These savings multiply over time when you include maintenance, parts, and depreciation.

Do refurbished C-Arms come with warranties?

Reputable providers offer warranties on refurbished units. The coverage ensures your equipment is protected against unexpected issues and includes access to service support.

Will a refurbished C-Arm meet my imaging needs?

Most clinics find that refurbished units provide all the imaging capability they require. Models like the OEC 9900 and 9800 continue to be the preferred choice nationwide for orthopedic, pain, and outpatient procedures.

How often should a C-Arm like the GE OEC 9900 be serviced?

At minimum, a full preventive maintenance inspection should be done annually. High-volume users should schedule service every six months. Monthly visual inspections of cables, cooling fans, and power connections are also highly recommended.

What are the early signs of C-Arm failure?

Look for system lag, flickering images, frequent error codes, or excessive noise from the cooling system. Any burning smell, unresponsive buttons, or random shutdowns should be addressed immediately to avoid further damage.

How long should a C-Arm’s X-ray tube last?

Most X-ray tubes in systems like the OEC 9900 or Siemens Cios Alpha last several years under normal use. However, frequent long exposures, overheating, or power instability can shorten lifespan dramatically. Tracking tube hours and following recommended exposure limits helps extend tube life.

Can my clinic perform basic maintenance on a C-Arm?

Yes, simple tasks like cleaning vents, checking cables, and inspecting connectors can be done in-house. But internal service, calibration, and safety testing should always be handled by certified biomedical engineers or service partners.

How much can downtime cost my clinic?

Even one day of downtime can cost a small imaging practice thousands in lost procedures and emergency repair costs. Preventive maintenance is far cheaper and ensures your C-Arm is always ready for patient care.

When Should You Call Pacific Healthcare Imaging?

If your C-Arm is showing any warning signs — such as slow startup, image flickering, power interruptions, or error codes — it’s time to contact Pacific Healthcare Imaging. Our certified technicians specialize in refurbished C-Arms like the GE OEC 9900, Siemens Cios, Philips Pulsera, and Ziehm models. Whether you need a quick diagnostic check, preventive maintenance, or a complete system refurbishment, our team can help you avoid costly downtime and restore your equipment to peak performance. Call Pacific Healthcare Imaging today or visit pacifichealthusa.com to schedule service or request a quote.

What’s the difference between a refurbished C-Arm and a used C-Arm?

A used C-Arm is typically sold “as is,” meaning it may only have gone through a quick cleaning or minor cosmetic touch-up before resale. A refurbished C-Arm from Pacific Healthcare Imaging, on the other hand, undergoes a complete restoration process. This includes a detailed inspection, replacement of worn or outdated parts, recalibration of imaging components, and full radiation and safety testing. The end result is a C-Arm that performs like new—backed by warranty and certification—giving clinics confidence that the system will deliver consistent, high-quality imaging for years to come.

How do you ensure that refurbished C-Arms meet the same standards as new equipment?

We follow a multi-phase refurbishment protocol modeled after manufacturer standards. Each unit is inspected for structural integrity, electrical performance, and radiation output. Components such as the X-ray tube, image intensifier, and generator are tested, repaired, or replaced as needed. The system is then calibrated using specialized diagnostic tools to restore image precision and alignment. Before shipment, every C-Arm undergoes a final quality assurance check and must pass functional, radiation, and safety compliance tests. Only systems that meet or exceed manufacturer benchmarks are cleared for delivery.

Are all refurbished C-Arms from Pacific Healthcare Imaging certified for radiation safety?

Yes. Every system we refurbish is tested and certified for radiation safety and performance compliance. Our technicians measure X-ray output, check shielding integrity, and verify that exposure controls operate correctly. We also ensure that the unit meets FDA and state-level standards for medical imaging devices. This level of testing gives clinics the assurance that their refurbished system is both safe and fully compliant with regulatory requirements.

What kind of parts do you use when refurbishing C-Arms?

We only use OEM-grade or manufacturer-approved replacement parts during the refurbishment process. Components such as high-voltage cables, detectors, collimators, and monitors are sourced from reliable suppliers who meet our strict quality standards. Using OEM parts preserves the original performance characteristics of the equipment and ensures long-term reliability. Every replacement part is tested and validated to ensure full compatibility and durability.

Do refurbished C-Arms come with a warranty or service support?

Absolutely. Every refurbished C-Arm sold by Pacific Healthcare Imaging includes warranty coverage for both parts and labor. In addition, clinics can enroll in our preventive maintenance programs, which provide routine inspections, software updates, and calibration checks. Our technical support team is available nationwide to assist with troubleshooting and repairs, ensuring that your equipment continues to perform at its best long after installation.

Are refurbished C-Arms as safe as new systems when it comes to radiation exposure?

Yes. Every refurbished C-Arm from Pacific Healthcare Imaging is restored and tested to meet the same radiation safety standards as a brand-new unit . We verify X-ray output, inspect shielding, and recalibrate all safety interlocks to ensure radiation exposure remains minimal and controlled. Our engineers use manufacturer-approved testing equipment to measure dosage and confirm that each system performs within FDA and state compliance limits. For clinics, this means peace of mind knowing your refurbished equipment delivers safe, accurate imaging every time.

How do you make sure refurbished systems meet radiation safety regulations?

Before delivery, each C-Arm goes through a multi-point inspection and certification process. This includes checking the X-ray tube, image intensifier, and generator to confirm consistent radiation output. We also review shielding integrity, dose controls, and exposure timers. Once testing is complete, the system is certified for clinical use under current radiation safety guidelines. This ensures the equipment meets all FDA, state, and manufacturer standards—something many used-equipment resellers do not provide.

Will my staff need additional radiation safety training after installing a refurbished C-Arm?

While your existing safety certification remains valid, Pacific Healthcare Imaging encourages every clinic to refresh their team’s training when a new or refurbished C-Arm is introduced. Even experienced operators benefit from reviewing updated radiation protocols, optimal positioning, and exposure reduction techniques. If requested, our team can recommend radiation safety resources and operator best practices specific to your model to ensure consistent compliance and confidence.

How often should a refurbished C-Arm be inspected for radiation performance?

We recommend scheduling preventive maintenance and radiation performance checks every 6–12 months. These inspections ensure that exposure levels remain within safe ranges and that shielding and calibration stay intact. Pacific Healthcare Imaging offers service and maintenance plans that include periodic safety testing, performance verification, and software calibration—helping clinics maintain consistent imaging quality and full compliance throughout the equipment’s life cycle.

What steps should my clinic take to minimize radiation exposure during procedures?

Even with a compliant C-Arm, operator habits play a key role in radiation safety. Clinics should always: Maintain distance between staff and the X-ray source when possible. Use lead aprons, thyroid collars, and lead glasses for every procedure. Keep exposure times as short as necessary , avoiding unnecessary fluoroscopy. Confirm that collimation and filters are correctly adjusted to limit scatter radiation. Schedule annual refresher training for all imaging staff. By combining well-maintained equipment with smart protocols, clinics can drastically reduce exposure without sacrificing image quality.

What makes Pacific Healthcare Imaging different from other companies selling refurbished equipment?

Many vendors simply resell used C-Arms with minimal testing. Pacific Healthcare Imaging, however, performs a complete technical refurbishment and radiation safety certification on every system we sell. We replace worn components, update software, and recalibrate the unit to factory standards. Each C-Arm comes with a warranty, optional service plan, and nationwide delivery that includes setup and guidance. We don’t just sell equipment—we partner with clinics to ensure long-term safety, compliance, and reliable performance.

How much can a clinic really save by purchasing a refurbished C-Arm instead of a new one?

Refurbished C-Arms typically cost 40–60% less than brand-new models. For a small or mid-sized medical practice, this difference can represent hundreds of thousands of dollars in savings over time. Those funds can be reallocated toward staff training, expanding services, or investing in other essential equipment. By choosing refurbished, clinics get the advanced imaging they need without the financial strain of buying new.

Are refurbished C-Arms as reliable as new machines?

Yes, when sourced from a trusted provider like Pacific Healthcare Imaging, refurbished C-Arms are thoroughly inspected, restored, and tested to meet or exceed manufacturer standards. The refurbishment process typically involves replacing worn parts, recalibrating imaging components, updating software, and performing extensive quality checks. This ensures that clinics receive a C-Arm that performs as reliably as a new machine, providing accurate imaging for every procedure.

What type of warranty is available for refurbished C-Arms?

One of the biggest misconceptions about refurbished equipment is that it lacks protection. At Pacific Healthcare Imaging, we provide warranty coverage options for all refurbished C-Arms . This includes technical support, preventive maintenance, and access to repairs if needed. The goal is to give clinics peace of mind, knowing their investment is secure and supported long after delivery.

How does nationwide delivery of refurbished C-Arms work?

Pacific Healthcare Imaging coordinates the entire delivery process from start to finish . Once a clinic selects its C-Arm, our logistics team carefully packages and ships the system to ensure it arrives safely. We deliver to both large cities and smaller communities across the U.S., and we can assist with setup and training upon arrival if requested. By handling all the details, we make it simple for clinics anywhere in the country to access high-quality refurbished imaging equipment.

Dev, Author at C Arms - New, Used and Rentals

Why Choose a Mini C-Arm?

Why choose a mini c-arm? It’s one of the more consequential equipment decisions a practice makes, and for hand and wrist surgeries, foot and ankle cases, or sports medicine work, the answer is clear and defensible. A mini c-arm is engineered specifically for extremity imaging, and when you match the right tool to the right…

ABOUT US

RECENT POSTS

CONTACT US